drucken / print   technisches Datenblatt this page in English this page in English this page in English

Technische Daten zu Artikelgruppe 114470M
Gigabit PoE Injektor DC Eingang, PoE IEEE 802.3at 35W Metallgeh

Gigabit PoE Injektor DC Eingang, PoE IEEE 802.3at 35W Metallgeh
Der Industrial High Power Gigabit Ethernet PoE (Power over Ethernet) Injector speist Endgeräte nach IEEE 802.3at Standard mit 10/100/1000MBit/s 1000Base-T Gigabit Ethernet und 35W Betriebsstrom bzw. alternativ Endgeräte nach IEEE 802.3af mit 15.4W.

Integrierte Befestigungslöcher ermöglichen Wandmontage ohne zusätzliche Panels oder Montage auf 35mm DIN Hutschiene in Kombination mit Rastelementen. Ausführung im Metallgehäuse auf Anfrage lieferbar.

Technische Daten
ProduktIndustrial Gigabit Ethernet PoE Injektor 35W High Power
Port(s) elektrischDaten Eingang: 10/100/1000MBit/s 1000Base-T Gigabit Ethernet
PoE PortsDaten Ausgang:
10/100/1000MBit/s 1000Base-T Gigabit Ethernet

Strom Ausgang:
+56V 35W
Load min./max.0.01A / 0.625A
Load reg.5 %
Line reg.1 %
Ripple1 %
Noise1 %
Noise bandwidth from DC to 20MHz
Ripple and Noise measured by paralleling a 0.1uF metalize capacitor on the test point
Pinbelegung PoEArtikel 114470x1x Mode A:

Pin
1
2
3
4
5
6
7
8
Daten
1000Base
A+
A-
B+
C+
C-
B-
D+
D-
Daten
100Base
RX+
RX-
TX+


TX-
Power

V DC (-)
V DC (-)
V DC (+)


V DC (+)



Artikel 114470x2x Mode B:

Pin
1
2
3
4
5
6
7
8
Daten
1000Base
A+
A-
B+
C+
C-
B-
D+
D-
Daten
100Base
RX+
RX-
TX+


TX-
Power




V DC (+)
V DC (+)

V DC (-)
V DC (-)


Optional revers Power (+/-) auf Anfrage.
LEDs
Bereit:rot
IEEE 802.3at / 802.3af PoE Strom ok:grün
Gehäuse114470xx1 und 114470xx2: Kunststoff
114470xx3 und 114470xx4: Metall
Montage114470xx1 und 114470xx3: Wandbefestigung
114470xx2 und 114470xx4: Hutschienenbefestigung
AbmessungenLxBxH: 124x74x33mm
Stromversorgung
Artikel


1144701xx
1144702xx
1144704xx
Eingangsspannung
redundant
von ~ bis
10V ~ 15V DC
18V ~ 36V DC
40V ~ 60V DC
Eingangsstrom


3.6A @ 12V DC
1.56A @ 24V DC
0.8A @ 48V DC
Anschlussbelegung Strom Eingang redundant
Efficiency> 80% @ Full Load
Betriebstemperatur-40°C .. +70°C
KühlungLüfterlos - Free air cooling
Lagertemperatur-40°C .. +85°C
relative Luftfeuchtigkeit
(nicht kondensierend)
5% .. 90%
Konform mitFCC Class B , EN55032 Class B, IEEE 802.3at, IEEE 802.3af
SchutzInput Protection: Sicherung
Dual Input Pin and Reverse Protection: No Work
Output Short GND Terminal will not damage the power supply and will Auto-Reset
Überstrom
Artikel 
1144701xx
1144702xx
1144704xx
120% ~ 160% @ 12V DC Input F.L.
120% ~ 160% @ 24V DC Input F.L.
120% ~ 160% @ 48V DC Input F.L.
UrsprungslandTaiwan
Bestellinformation Artikel
114470113GbE PoE Injektor IN:10-15VDC IEEE 802.3at Mode A Metallgehäuse
114470114GbE PoE Injektor IN:10-15VDC IEEE 802.3at Mode A Met. DIN Rail
114470123GbE PoE Injektor IN:10-15VDC IEEE 802.3at Mode B Metallgehäuse
114470124GbE PoE Injektor IN:10-15VDC IEEE 802.3at Mode B Met. DIN Rail
114470213GbE PoE Injektor IN:18-36VDC IEEE 802.3at Mode A Metallgehäuse
114470214GbE PoE Injektor IN:18-36VDC IEEE 802.3at Mode A Met. DIN Rail
114470223GbE PoE Injektor IN:18-36VDC IEEE 802.3at Mode B Metallgehäuse
114470224GbE PoE Injektor IN:18-36VDC IEEE 802.3at Mode B Met. DIN Rail
114470413GbE PoE Injektor IN:40-60VDC IEEE 802.3at Mode A Metallgehäuse
114470414GbE PoE Injektor IN:40-60VDC IEEE 802.3at Mode A Met. DIN Rail
114470423GbE PoE Injektor IN:40-60VDC IEEE 802.3at Mode B Metallgehäuse
114470424GbE PoE Injektor IN:40-60VDC IEEE 802.3at Mode B Met. DIN Rail
Bestellinformation Zubehör
06360000119" Einsatz mit DIN Hutschiene für Netzwerk-Verteiler
Maßzeichnung
Maßzeichnung 114470M Gigabit PoE Injektor DC Eingang, PoE IEEE 802.3at 35W Metallgeh
Die Produktbeschreibung wurde mit größter Sorgfalt erstellt. Für Irrtümer oder Fehler wird keine Haftung übernommen. Änderungen vorbehalten.

UBF EDV Handel und Beratung

Römerstr. 37
44579 Castrop-Rauxel
Germany
Tel: +49 (0)2305 9634 0
Fax: +49 (0)2305 9634 17
https://www.ubf.de
eMal: vertrieb@ubf.de