Fiber optic media converters / transceivers / modems and multiplexers for EIA-232 / RS-232 interfaces
  UBF Shop Information   Shop Info  
Subscribe product links relating to RS-232 fiber optic converter and multiplexer from UBF
fiber optic converter (media converter / transceiver)
ImageTypeElectrical
Ports		Fiber PortsHandshakeBit RatePower InputRelais OutMounting
Fiber optic converter transmits RS-232 signals transparent via multimode or singlemode (monomode) optical fiber. D-Sub9 socket, DCE, transmits handshake (RTS, CTS, DTR, DSR), optical isolation between RS-232 and main circuitry, ESD-protection and overvoltage protection (RS232), relay signal contact for power failure, fanless metal case, dimensions WxDxH 28x82x95mm, mounting on 35mm DIN rail, operating temperature -30..+70°C, input voltage +7V..+30V DC at screw terminal or DC socket. media converter /
transceiver /
f/o modem 		Sub-D 9 pin
female		multimode ST/SC
singlemode SC
BiDi ( WDM single fiber )		xon / xoff
CTS / RTS
DTR / DSR		0...120kBit/s2x +7..+30VDC
screw clamp
or:
DC-Jack
-D 6.3mm +D 2.0mm		XDIN Rail
EIA-232 (RS-232) fiber optic transceiver (Modem / media converter) for active coupling of RS-232 FDX lines with fiber optic transmission lines. 9pin Sub-D RS-232 asynchronous Xon/Xoff, DTE/DCE (switchable), full duplex, signal delay RS232-fiber optic: 500ns, mounting: 35mm DIN rail, casing stainless steel, powder coated, dimensions 115x61x113mm (HxWxD), input voltage 12..30V DC, operating temperature -20..+55°C. Fiber optic: Multimode / singlemode / POF (K-fiber optic) / HCS. media converter /
transceiver /
f/o modem 		Sub-D 9 pin
female		1 or 2 ports
multimode or
singlemode:
ST or SC
POF:
ST or FSMA		xon / xoff0...115.2kBit/s18..30V DC
200mA		-DIN Rail
4-channel EIA-232 (RS-232) multiplexer asynchronous with 1x fiber optic link port, 1x 9pin Sub-D, 4x RS-232 Xon/Xoff, or 1x RS232 with hardware handshake, 115,2KBit/s per channel, full duplex, 35mm DIN rail mountable, casing stainless steel, powder coated dimensions 120x60x113mm (HxWxD), input voltage 12..30 V DC, operating temperature -40..+70°C. 4 channel multiplexer /
media converter /
transceiver /
fiber optic modem 		Sub-D 9 pin
female		multimode / monomode
ST / SC
POF
ST / FSMA		xon / xoff
hardware handshake		0...115.2kBit/s18..30VDC
200mA		-DIN Rail
Multi power transceiver: Voltage: Data line with test function, USB cable or external 5V DC...12V DC. D-Sub 9pin socket, transfer rate: 300 bps up to max. 115.2 kbps, CE Class B, FCC Class B, dimensions 42x80x22mm, operating temperature 0..60°C. media converter /
transceiver /
f/o modem 		Sub-D 9 pin
female		multimode ST
singlemode ST		xon / xoff300bps...115.2kbpsRS-232 interface port
(TxD,RTS,DTR)
with test feature or
USB cable or
external 5V DC...12V DC		-mini
plug case
42x80x22mm
signal- / protocol-converter
ImageTypeElectrical
Ports		Fiber PortsHandshakeBit RatePower InputRelais OutMounting
Industrial media converter RS-232 DB9 socket / RS-422/RS-485 2-wire or 4-wire clamp, up to 115.2Kbps, overvoltage protection (transient voltage), high ESD protection, optical isolation between RS-232 and RS-485/422, remote RTS control, ADCTM, DIN rail mountable. serial
converter
RS-232
485 / RS-422		Sub-D 9-pin socket
screw terminal
-RTS, CTS
DTR, DSR
DCD, GND		max.
115.2 kBit/s		2x +7..+30VDC
screw terminal or
DC-Jack
-D 6.3mm +D 2.0mm		XDIN Rail
Industrial terminal Server (Com Server) with 1x RS-232 D-Sub9 plug (male / pins) DTE galvanic isolated, 100Base-TX 10/100 MBit/s Fast Ethernet RJ-45 port PoE PD (powered device) and 1x 100Base-FX 100MBit/s SFP slot. Bandwidth max. 230400 Bit/s, relay contact, operating temperature -30°C..+70°C, input voltage +8..+60V DC or 802.3af POE, consumption max.2W @ 24V DC, 3W @ 48V PoE, fanless metal case, dimensions WxDxH 40x80x95mm, mounting on 35mm DIN rail. Approvals FCC Class A, VCII Class A, CE Class A. Device Server
COM Server
Terminal Server 		RS-232
Sub-D 9-pin
DTE male
Fast Ethernet RJ-45		Fast Ethernet SFP Slot-max.
230400 Bit/s		Screw terminal 8V..60V DC
DC plug 8V..30V DC
PoE IEEE 802.3af		XDIN Rail
The device Server converts RS-232 or RS-422 / RS-485 COM ports according to Ethernet TCP/IP and vice versa. Serial: RS-232 at DB9, RS-422/RS485 at screw terminal max. 921600bps, Ethernet: 100Base-TX 10/100MBit/s Fast Ethernet RJ-45 port or 100Base-FX 100MBit/s fiber optic port, protection class IP30, operating temperature -10°C .. +60°C, dimensions WxDxH 135x97x32mm, input voltage 12..48V DC, consumption 10.1W, alarm contact for report of power failure, for fastening on 35mm DIN rail. Device Server
COM Server
RS-232
RS-485/RS-422
Fast Ethernet 		DB9
screw terminal
RJ-45 / SFP
Fast Ethernet SFP SlotRTS/CTS
DTR/DSR
xon/xoff		max.
921.600 Bit/s		Screw terminal
12V..48V DC
redundant		XDIN Rail
Accessories
power suppliespower supplies
fiber optic indoor, outdoor and indoor/outdoor cable, loose tube, made to ordersimplex and duplex fiber optic patch cables, made to order and stock itemsfiber optic cables: simplex and duplex patch cables, tight buffered, breakout, loose tube, indoor, outdoor, indoor/outdoor - made to order and stock items
ready to use with connectors of your choice
FiberCheck quick test equipment for multimode and singlemode fibersFiberCheck quick test equipment for multimode and singlemode fibers
DIN rail installation panel for 19" distribution cabinet 3HU, 15cm deepDIN rail installation panel for 19" distribution cabinet 3HU, 15cm deep
RJ-45 patch cable made-to-order S-FTP, S-STP and S-STP PUR jacketRJ-45 patch cable made-to-order
S-FTP, S-STP and S-STP PUR jacket
field installable RJ-45 connector for installation cable, Cat.5e, IP20 AWG 26 to AWG 22, cable diameter: 5 to 8 mmfield installable RJ-45 connector for installation cable, Cat.5e, IP20 AWG 26 to AWG 22, cable diameter: 5 to 8 mm