technical data sheet

diese Seite auf deutsch

Technical data on item group 1296800E
Industrial Gigabit Ethernet E-Mark PoE Switch 8x IEEE 802.3at

Rugged 8 port Industrial Gigabit Ethernet High PoE Power over Ethernet switch in fanless metal case, E-Mark certified for any industrial networking application within factory automation, ITS (including on-vehicle) solar, security or any other outdoor environment. The RJ-45 ports provide data transmission and operating current up to 30 W per end device. The input voltage range of 9V..55V DC allows the operation in environments with 12V DC, 24V DC or 48V DC without additional use of transformers. Please note the information for the PoE budget. The redundant DC power input ports, the isolated alarm contact, the mounting options for 35mm DIN rail or wall mounting and the extended temperature range allow the use in almost all areas of industrial data communication.
Technical data
Product	Industrial Ethernet PoE switch with 8 Gigabit Ethernet RJ-45 high PoE ports input voltage 9 .. 55V DC with E-Mark certification
Data ports	8x Gigabit Ethernet RJ-45
Bit rate	8x 10/100/1000MBit/s Gigabit Ethernet full duplex RJ-45 ports
Flow control	IEEE 802.3x Flow Control and Back Pressure
PoE ports	8x PoE+ (High PoE) max. 30W /Port Pins 1+ 2+ 3- 6-, Mode A total budget:  9V DC 12V DC 24V DC 36V DC 48V .. 55V DC 60W 90W 150W 200W 240W
Framesize	9.6KBytes Jumbo Frame Support
LEDs	System: power 1 power 2 fault green green red active active power 1 or 2 inactive per port: link / active / PoE status
Housing	IP30 metal case
Mounting	35mm DIN rail mountable wall-/panel mounting both included in delivery
Dimensions	WxHxD 46x142x99mm
Fault Alarm Contact	24V DC, 1A resistive
Power requirements	Input voltage 9V .. 55V DC redundant at screw terminal removable terminal block
Power consumption	max. 13.5W without PoE
Operating temperature	-40°C .. +75°C
Storage temperature	-40°C .. +85°C
relative humidity (non condensing)	5% ... 95%
Stability tests	IEC60068-2-32 (free Fall) IEC60068-2-27 (Shock) IEC60068-2-6 (Vibration)
Safety Standard(s)	FCC, CE, E-Mark
EMI electromagnetic interference	CE EN55032/EN61000-6-4 Class A FCC Part 15 Subpart B Class A
EMS electromagnetic sensitivity	CE EN55035/EN61000-6-2: IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS),IEC61000-4-8 (Magnetic Field)
Protection	Overload Current Protection Reverse Polarity Protection Present (Slow-Blow Fuse) Present
Ordering information item 1296800E2 Industrial Gigabit Ethernet E-Mark PoE Switch 8x IEEE 802.3at Ordering information Accessories 114462512 PoE Splitter 40..60V DC 12V / 2.08A 25W GbE 802.3at 114462524 PoE Splitter 40..60V DC 24V / 1.04A 25W GbE 802.3at 114462612 PoE Splitter 40..60V DC 12V / 2.08A 25W GbE 802.3at DIN rail 114462624 PoE Splitter 40..60V DC 24V / 1.04A 25W GbE 802.3at DIN rail
Dimensional drawing
The product description has been prepared with great care. No liability is accepted for fallacies or errors. Subject to change.