![]() |
![]() |
![]() 8x RJ-45 ports provide data transmission and operating current up to 30 W per end device. The input voltage range of 12V..36V DC allows the operation in 24V areas without additional use of transformers. The redundant DC power input ports, the isolated alarm contact, the mounting options for 35mm DIN rail or wall mounting and the extended temperature range allow the use in almost all areas of industrial data communication. | |||||||||||||||||
Technical data | |||||||||||||||||
Product | Manageable Industrial Ethernet PoE switch with 8 Gigabit Ethernet RJ-45 high PoE ports | ||||||||||||||||
Power requirements | Input voltage 12..55V DC at screw terminal removable terminal block consumption max. 255W incl. PoE | ||||||||||||||||
Housing | fanless IP30 metal case | ||||||||||||||||
Dimensions | WxHxD 54x142x99mm | ||||||||||||||||
Data ports | 8x Gigabit Ethernet RJ-45 | ||||||||||||||||
Bit rate | 8x 10/100/1000MBit/s Gigabit Ethernet Full Duplex RJ-45 Ports | ||||||||||||||||
Flow control | Full Duplex: IEEE 802.3x Flow Control Half Duplex: Back Pressure | ||||||||||||||||
PoE ports | 8x PoE+ (high PoE) IEEE 802.3at max. 30W /port
| ||||||||||||||||
Framesize | 9.6 K-Bytes Jumbo Frame Support | ||||||||||||||||
Management / Standards | Web / Telnet / RS-232 CLI / SNMP v1/v2c TFTP / SNTP / SMTP / Syslog STP, RSTP,MSTP, G.8032 ERPS (Recovery Time <50ms) IGMP v1/v2 max. 256 groups QoS (IEEE802.1p) and CoS/ToS IEEE802.1Q VLAN System Warning Setting for Automatic Warning through E-Mail USB 2.0 for Configuration Backup | ||||||||||||||||
LEDs |
| ||||||||||||||||
Mounting | 35mm DIN rail mountable wall-/panel mounting both included in delivery | ||||||||||||||||
Fault Alarm Contact | present | ||||||||||||||||
Operating temperature | -40°C ... +75°C | ||||||||||||||||
relative humidity (non condensing) | 5% ... 95% | ||||||||||||||||
Stability tests | IEC60068-2-32 (free Fall) IEC60068-2-27 (Shock) IEC60068-2-6 (Vibration) | ||||||||||||||||
Safety Standard(s) | FCC, CE | ||||||||||||||||
| |||||||||||||||||
Dimensional drawing ![]() | |||||||||||||||||
The product description has been prepared with great care. No liability is accepted for fallacies or errors. Subject to change. |
UBF EDV Handel und Beratung Römerstr. 37 44579 Castrop-Rauxel Germany | Tel: +49 2305 9634 0 Fax: +49 2305 9634 17 | https://www.ubf.de eMal: vertrieb@ubf.de |