technical data sheet

diese Seite auf deutsch

Technical data on item group 11449616
Gigabit PoE injector IN:10-36V DC OUT:IEEE 802.3at 35W IP67

The Industrial high power Gigabit Ethernet PoE (Power over Ethernet) injector feeds devices according to IEEE 802.3at standard with Gigabit Ethernet and 35W operating current rsp. alternatively devices according to IEEE 802.3af with 15.4W. The design, compliant with EN60945 and EN50155, also meets the specific requirements for maritime and railway operations. integrated mounting brackets enable the recessed mounting without additional Panels.
Technical data
Product	Industrial Gigabit Ethernet PoE injector 35W high power also suitable for marine and railway
Port(s) electrical	Data input: Gigabit Ethernet
PoE ports	Data output: Gigabit Ethernet current output: +56V 35W IEEE 802.3at Load min. / max. 0 A / 0.625 A Load reg. 5 % line reg. 1 % Ripple 1 % Noise 1 % Noise bandwidth from DC to 20MHz Ripple and Noise measured by paralleling a 0.1uF metalize capacitor on the test point
Pin assignment PoE	pin M12 X 1 2 3 4 5 6 7 8 data 1000Base A+ A- B+ B- D+ D- C- C+ power V DC (-) V DC (-) V DC (+) V DC (+)
Housing	Metal
Dimensions	LxWxH: 160x106x46mm without mounting bracket (see dimensional drawing)
Power requirements	10V DC .. 36V DC redundant
Efficiency	min. 75% at full load, 12V DC or 24V DC input voltage
Operating temperature	-40°C .. +75°C
Cooling	Fanless - Free air cooling
Storage temperature	-40°C .. +85°C
relative humidity (non condensing)	5% .. 90%
Compliance	Safety EMC PoE EN62368-1, EN45545 FCC Class B, EN55032/EN55035 Class B, EN60945, EN50155 IEEE802.3AT mode B, class 0
Protection	Input protection: Fuse Output Short GND Terminal will not damage the power supply and will Auto-Reset
Country of origin	Taiwan
Ordering information item 114496161 Gigabit PoE injector IN:10-36V DC OUT:IEEE 802.3at 35W IP67
Dimensional drawing
The product description has been prepared with great care. No liability is accepted for fallacies or errors. Subject to change.