print   technical data sheet diese Seite auf deutsch   diese Seite auf deutsch

Technical data on item group 11449612
10-Gigabit PoE injector IN:10-36V DC OUT:IEEE 802.3at 35W

10-Gigabit PoE injector IN:10-36V DC OUT:IEEE 802.3at 35W
The Industrial high power Gigabit Ethernet PoE (Power over Ethernet) injector feeds devices according to IEEE 802.3at standard with 10/100/1000/5000/10000MBit/s 10GBase-T (10 Gigabit Ethernet) and 35W operating current rsp. alternatively devices according to IEEE 802.3af with 15.4W.

With CE approvals EN60945 and EN50155 the devices meet the special requirement for marine and railway.

Integrated mounting holes enable wall mounting without additional Panels or mounting on 35mm DIN rail in combination with snap-in elements.

Technical data
ProductIndustrial Gigabit Ethernet PoE injector 35W high power
also suitable for marine and railway
Port(s) electricalData input:
1000/5000/10000MBit/s 10GBase-T
10 Gigabit Ethernet
PoE portsData output:
1000/5000/10000MBit/s 10GBase-T
10 Gigabit Ethernet

current output:
+56V 35W IEEE 802.3at
Load min. / max.0 A / 0.625 A
Load reg.5 %
line reg.1 %
Ripple1 %
Noise1 %
Noise bandwidth from DC to 20MHz
Ripple and Noise measured by
paralleling a 0.1uF metalize capacitor on the test point
Pin assignment PoE

pin
1
2
3
4
5
6
7
8
data
1000Base
A+
A-
B+
C+
C-
B-
D+
D-
data
100Base
RX+
RX-
TX+


TX-
power




V DC (+)
V DC (+)

V DC (-)
V DC (-)
LEDs
yellow
green
power ready
IEEE 802.3at current ok.
HousingMetal
MountingWall mountable
optional DIN rail mountable
DimensionsLxWxH: 122.5x74x33mm
Power requirements
10V DC .. 36V DC redundantterminal pin assignment input current redundant
Efficiencymin. 75% at full load,
12V DC or 24V DC input voltage
Operating temperature
up to
5 GBit/s
10 GBit/s  
distance  
100m
50m
max. Temperature
70°C
25°C .. 70°C *)
*) The maximum operating temperature for 10GbE depends on the properties of the data cable used (min Cat.6a).
CoolingFanless - Free air cooling
Storage temperature-40°C .. +85°C
relative humidity
(non condensing)
5% .. 90%
Compliance
Safety
EMC
PoE
EN62368-2, EN45545
FCC Class B, EN60945, EN50155
IEEE802.3AT mode B, class 0
ProtectionInput protection: Fuse
dual input pin and reverse protection: No Work
Output Short GND Terminal will not damage the power supply and will Auto-Reset
Country of originTaiwan
Ordering information item
11449612110GbE PoE injector IN:10-36VDC -40..+40°C
11449612210GbE PoE injector IN:10-36VDC -40..+40°C DIN rail
Ordering information Accessories
101417601Industrial 10-Gigabit Ethernet PoE splitter IEEE 802.3bt PoE++
06360000119" panel with DIN rail for network-distribution racks
Dimensional drawing
dimensional drawing 11449612 10-Gigabit PoE injector IN:10-36V DC OUT:IEEE 802.3at 35W
The product description has been prepared with great care. No liability is accepted for fallacies or errors. Subject to change.

UBF EDV Handel und Beratung

Römerstr. 37
44579 Castrop-Rauxel
Germany
Tel: +49 2305 9634 0
Fax: +49 2305 9634 17
https://www.ubf.de
eMal: vertrieb@ubf.de