technical data sheet

diese Seite auf deutsch

Technical data on item group 1144699
Gigabit PoE injector IN:10-36V DC OUT: 24V DC 19.2W mode B

The Industrial Gigabit Ethernet Power over Ethernet injector feeds end devices with 10Base-T Ethernet, 100Base-TX Fast Ethernet or 1000Base-T Gigabit Ethernet data and 24V DC 20W operating current. integrated mounting holes enable wall mounting without additional Panels or mounting on 35mm DIN rail in combination with snap-in elements.
Technical data
Product	Industrial Gigabit Ethernet PoE injector input voltage 10V DC ... 36V DC output voltage 24V DC permanent
Port(s) electrical	Data input: 1000Base-T Gigabit Ethernet
PoE ports	Data output: 1000Base-T Gigabit Ethernet current output: +24V 20W Load max. 0.84A Load min. 0.01A Load reg. 5 % line reg. 1 % Ripple 1 % Noise 1 % Noise bandwidth from DC to 20MHz Ripple and Noise measured by paralleling a 0.1uF metalize capacitor on the test point
Pin assignment PoE	item 11446992x: 11446991x pins 45+, 78- 12-, 36+ mode B (standard) A
LEDs	PoE current ok: green
Housing	Plastic
Dimensions	LxWxH 85x78x36mm
Power requirements	10V DC .. 36V DC 2.50A @ 10V DC 0.70A @ 36V DC
Efficiency	80% min. at full load, @ 10V DC ~ 36V DC input voltage
Operating temperature	-35°C ... +70°C
Cooling	Fanless - Free air cooling
Storage temperature	-40°C .. +85°C
relative humidity (non condensing)	5% .. 90%
Compliance	FCC Class A, EN55032 Class A, EN55035, EN60945, EN50155
Protection	Input protection: Fuse Dual Input Pin and Reverse Protection: No Work
Overcurrent	120% ~ 160% @ 10V ~ 36V DC Input F.L.
Country of origin	Taiwan
Ordering information item 114469921 Gigabit PoE injector IN:10-36V DC OUT: 24V DC 19.2W mode B 114469922 Gigabit PoE injector IN:10-36V DC OUT: 24V DC 19.2W DIN rail 114469923 GbE PoE injector IN:10-36V DC OUT: 24V DC 19.2W mode B Met 114469924 GbE PoE injector IN:10-36V DC OUT: 24V DC 19.2W DIN rail Met. 114469911 Gigabit PoE injector IN:10-36V DC OUT: 24V DC 19.2W mode A 114469912 Gigabit PoE injector IN:10-36V DC OUT: 24V DC A 19.2W DIN rail 114469913 GbE PoE injector IN:10-36V DC OUT: 24V DC 19.2W mode A Met 114469914 GbE PoE injector IN:10-36V DC OUT: 24VDC A 19.2W DIN rail Met. Ordering information Accessories 063600001 19" panel with DIN rail for network-distribution racks
Dimensional drawing
The product description has been prepared with great care. No liability is accepted for fallacies or errors. Subject to change.