technical data sheet

diese Seite auf deutsch

Technical data on item group 11446995
Gigabit PoE injector IN:10-36V DC OUT:48V DC

The Industrial Gigabit Ethernet Power over Ethernet injector feeds end devices with 10Base-T Ethernet, 100Base-TX Fast Ethernet or 1000Base-T Gigabit Ethernet data and 48V DC operating current. integrated mounting holes enable wall mounting without additional Panels or mounting on 35mm DIN rail in combination with snap-in elements.
Technical data
Product	Industrial Gigabit Ethernet PoE injector input voltage 10V DC ... 36V DC output voltage 48V DC permanent (passive)
Port(s) electrical	Data input: 1000Base-T Gigabit Ethernet
PoE ports	Data output: 1000Base-T Gigabit Ethernet current output: +48V 17W Load max. 0.35A Load reg. 5 % line reg. 1 % Ripple 1 % Noise 1 % Noise bandwidth from DC to 20MHz Ripple and Noise measured by paralleling a 0.1uF metalize capacitor on the test point
Pin assignment PoE	11446994x: Pins 45+, 78- mode B (default)
LEDs	PoE current ok: green
Housing	Metal
Dimensions	LxWxH 82x56x35mm
Power requirements	9V DC .. 36V DC 1.85A @ 12V DC 0.90A @ 24V DC
Efficiency	75% min. at Full Load, @ 12V DC - 24V DC
Operating temperature	-40°C ... +70°C
Cooling	Fanless - Free air cooling
Storage temperature	-40°C .. +85°C
relative humidity (non condensing)	5% .. 90%
Compliance	CSA 22.2, EN60950-1 FCC Class A, EN55032 Class A
Protection	Input protection: Fuse Dual Input Pin and Reverse Protection: No Work Output Short GND Terminal will not damage the power supply and will Auto-Reset
Overcurrent	120% ~ 160% @ 12V DC Input F.L.
Country of origin	Taiwan
Ordering information item 114469925 GbE PoE injector Vin:10V-36V DC Vout 48V DC 17W mode B Met-Geh
Dimensional drawing
The product description has been prepared with great care. No liability is accepted for fallacies or errors. Subject to change.