technical data sheet

diese Seite auf deutsch

Technical data on item group 11445560
Gigabit Ethernet PoE++ injector 10-60V DC 70W IEEE 802.3bt

The Industrial Gigabit Ethernet PoE++ Injector feeds devices according to IEEE 802.3bt standard with 10/100/1000MBit/s 1000Base-T Gigabit Ethernet and up to 70W operating current or alternatively devices according to IEEE 802.3at with 30W or according to IEEE 802.3af with 15.4W. With the extended temperature range and the mounting option on a 35mm DIN rail the device is suitable for using in industrial environments.
Technical data
Product	PoE++ injector Gigabit Ethernet 70W IEEE 802.3bt
Port(s) electrical	Data input: 10/100/1000MBit/s 1000Base-T Gigabit Ethernet
PoE ports	Data output: 10/100/1000MBit/s 1000Base-T Gigabit Ethernet current output: +56V 70W Load min./max. 0A / 1.25A Load reg. 5 % line reg. 1 % Ripple 1 % Noise 1 % Noise bandwidth is from DC to 20MHz Ripple and Noise measured by paralleling a 0.1uF metalize capacitor on the test point
Pin assignment PoE	pin 1 2 3 4 5 6 7 8 data input A+ A- B+ C+ C- B- D+ D- data/PoE output -V DC A+ -V DC A- +V DC B+ +V DC C+ +V DC C- +V DC B- -V DC D+ -V DC D-
LEDs	PWR: Current input PoE OUT: PoE current
Housing	Plastic case
Mounting	35mm DIN rail mount
Dimensions	WxDxH 46x102x125mm
Power requirements	10V .. 60V DC
Efficiency	86% min at full load
Operating temperature	-40°C .. +50°C
Cooling	Fanless
relative humidity (non condensing)	5% .. 90%
Standard(s)	IEEE 802.3bt IEEE 802.3at IEEE 802.3af
Protection	Input protection: Fuse Output Short GND Terminal will not damage the Power Supply and will auto-Reset. Input Reverse Protection: No Work
Overcurrent	802.3bt limits @all input F.L
Country of origin	Taiwan
Ordering information item 114455603 DIN rail PoE injector IEEE 802.3bt 70W 10..60V DC Ordering information Accessories 063600001 DIN rail installation panel for 19 inch distribution rack
The product description has been prepared with great care. No liability is accepted for fallacies or errors. Subject to change.