technical data sheet

diese Seite auf deutsch

Technical data on item group 114420G
PoE Plus injector Gigabit Ethernet 70W high power at

The Industrial high power Gigabit Ethernet PoE (Power over Ethernet) injector feeds devices according to IEEE 802.3at standard with 10/100/1000MBit/s 1000Base-T Gigabit Ethernet and 70W operating current or alternatively devices according to IEEE 802.3at with 35W or according to IEEE 802.3af with 15.4W. With the extended temperature range and the mounting option on the DIN rail is the device suitable for the use in an industrial environment. Integrated mounting holes enable wall mounting without additional accessories or mounting on 35mm DIN rail in combination with snap-in elements.
Technical data
Product	PoE Plus injector Gigabit Ethernet 70W high power at
Port(s) electrical	Data input: 10/100/1000MBit/s 1000Base-T Gigabit Ethernet
PoE Power over Ethernet ports	Data output: 10/100/1000MBit/s 1000Base-T Gigabit Ethernet current output: +56V 70W Load min./max. 0.01A / 1.25A Load reg. 5 % line reg. 1 % Ripple 1 % Noise 1 % Noise bandwidth is from DC to 20MHz Ripple and Noise measured by paralleling a 0.1uF metalize capacitor on the test point Capacity up to 70W with 40°C. Output up to 70W at 40C. De-rate output power by 1W for every 1 deg C rise above 40°C up to 70°C Example: 60W at 50°C, 50W at 60°C.
LEDs	LED on casing: current input LED RJ45 out: PoE current
Power requirements	114420240 18V .. 36V DC 114420480 36V .. 72V DC
Efficiency	80% min with full load
Input Protection	Fuse
Overcurrent	114420240: 110% .. 130% at all DC input 114420480: 120% .. 160% at 48V DC input
Input reverse protection	Present
Housing	Plastic
Dimensions	WxDxH 72x125x38mm
Mounting	Wall mountable optional DIN rail mountable
Operating temperature	-40°C .. +70°C
Storage temperature	-40°C .. +85°C
relative humidity (non condensing)	5% .. 90%
Cooling	Fanless
Pin assignment PoE	Pin 1 2 3 4 5 6 7 8 Data input A+ A- B+ C+ C- B- D+ D- Data/PoE output -V DC A+ -V DC A- +V DC B+ +V DC C+ +V DC C- +V DC B- -V DC D+ -V DC D-
Compliance	CE, FCC, UL1950 (no certification), CSA 22.2, TUV EN60950, EN55022
Country of origin	Taiwan
Ordering information item 114420240 PoE Plus injector GbE In: 18-36V DC 70W high power at 114420246 PoE Plus injector GbE IN: 18-36V DC 70W high power at DIN rail Ordering information Accessories 063600001 DIN rail installation panel for 19 inch distribution rack
Dimensional drawing
The product description has been prepared with great care. No liability is accepted for fallacies or errors. Subject to change.