technical data sheet

diese Seite auf deutsch

Technical data on item group 10145001
Industrial Gigabit Ethernet switch 5x 1000Base-T ext.Temp.

Robust Industrial Gigabit Ethernet switch in fanless metal case. The redundant DC power input ports, the isolated signal contact, the small dimensions, the mounting options for 35mm DIN rail or wall mounting and the extended temperature range allow the use in almost all areas of industrial data communication.
Technical data
Product	Industrial Gigabit Ethernet switch
Port(s) electrical	1000Base-TX 10/100/1000MBit/s RJ-45 interface auto-negotiation and auto MDI / MDI-X
Bit rate	RJ-45 10/100/1000MBit/s full duplex
Flow control	Back pressure for half duplex IEEE 802.3x Pause Frame for full duplex
Framesize	max. 9K Jumbo Frame
LEDs	power: RJ-45 ports: IN 1 (green) IN 2 (green) power error (red) = no redundancy 1000MBit/s LNK / ACT (green) 10/100MBit/s LNK / ACT (orange)
Casing	IP30 metal case
Mounting	35mm DIN rail and wall mounting
Dimensions	WxDxH 30x70x104mm (without screw terminal)
Fault Alarm Contact	Relay output for power failure 1A @ 24V DC
Weight	252g
Power requirements	12V DC up to 48V DC redundant power with polarity reverse protect function
Power consumption	3.6W / 12.35BTU
Operating temperature	-40°C .. +75°C
relative humidity (non condensing)	5% .. 90%
Stability tests	IEC60068-2-32 (free fall) IEC60068-2-27 (shock) IEC60068-2-6 (vibration)
Standard(s)	IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3x Full-Duplex Flow Control
Compliance	FCC Part 15 Class A, CE
Protection	EFT 6KV DC ESD 6KV DC
Country of origin	Taiwan
Ordering information item 1014500ST Industrial GbE switch 5x 1000Base-T -40°..+75°C DIN rail Ordering information Accessories 11524024R Power supply 85-264V AC, OUT: 24V DC, 40W, -20..70°C DIN rail 063600001 DIN rail installation panel for 19 inch distribution rack
Dimensional drawing
The product description has been prepared with great care. No liability is accepted for fallacies or errors. Subject to change.