technical data sheet

diese Seite auf deutsch

Technical data on item 099223285
RS-232 FDX f/o converter POF or multimode point-to-point

The RS-232 fiber optic converter is a compact Modem for transmission of an asynchronous RS232 data channel in full-duplex-operation mode. The feeding voltage can be provides at the Sub-D connector or at a screw terminal. Depending to the fiber optic cable the maximum transmission distance can reach up to 3km. The operating temperature range allows operation in non airconditioned environments.
Technical data
Product	RS-232 fiber optic converter duplex DLP D-Sub9 POF and multimode fiber optic
Wavelength	optical fiber or HCS / PCF polymer optical fiber (POF) 850nm 660nm
Port(s) electrical	RS-232 25-pin. Sub-D
Pin assignment	pin 2 3 4 5 6 7 8 18 20 21 Name TxD RxD RTS CTS DSR GND DCD Vcc DTR V+ function data IN data OUT bridge to CTS bridge to RTS bridge to DCD.DTR reference potential bridge to DSR,DTR +5V DC input/output bridge to DSR,DCD 9~30V DC IN
Port(s) optical	fiber 50/125μm multimode 980/1000μm POF wavelength 850nm 660nm connector ST/BFOC / F-SMA ST/BFOC / F-SMA optical budget 15dB 23dB max. distance 3000m 70m +3V = '0': Light ON -3V = '1': Light OFF inverted Modems on request available
Bit rate	0 .. 120 kBit/s
LEDs	Power Good Receive Data
Housing	Metal case
IP rating	IP40
Mounting	optional with snap-in element for 35mm DIN rail (not retrofittable)
Dimensions	LxWxH ca. 72x55x20 mm
Weight	ca. 100 g
Power requirements	9V ... 30V DC at screw terminal or +5V DC +/- 5% at Sub-D pin 18 (do not use the screw terminal!) or 9V ... 30V DC at Sub-D pin 21 (do not use the screw terminal!)
Power consumption	70mA +/- 10% @ 5V DC
Operating temperature	-40°C .. +80°C
Storage temperature	-55°C ... + 125°C
Compliance	EN 55022 / EN 50081-1 EN 55024 / EN 50082-1 EN 50082-2
Country of origin	Germany
Ordering information item
This item / this item group has been replaced. The successor model is   0959011
Dimensional drawing
The product description has been prepared with great care. No liability is accepted for fallacies or errors. Subject to change.