technical data sheet

diese Seite auf deutsch

Technical data on item 099221
RS-422 fiber optic converter full duplex 4-wire point-to-point

The RS-422 fiber optic converter is a compact Modem for transmission of an asynchronous RS422 data channel in full-duplex operation mode. The feeding voltage can be provided at the Sub-D connector or at a screw terminal. The polymer optical fiber (POF) allows transmission distances up to 70m. The extended operating temperature range allows operation in non airconditioned environments.
Technical data
Product	RS-422 FDX fiber optic converter full-duplex D-Sub9 for POF
Wavelength	660 nm
Port(s) electrical	RS-422 9-pin. Sub-D
Pin assignment	Pin 1 2 3 4 5 6 7 8 9 Name NC NC TxA / RxA NC GND Vcc V+ TxB / RxB NC Function not connected not connected data In / Out positive not connected system ground +5V DC IN / OUT 9 .. 30V DC IN data In / Out inverted not connected Do not use NC pins!
Port(s) optical	fiber 980/1000μm POF wavelength 660nm connector clamp ST/BFOC F-SMA max. distance 70m +200mV = high light ON -200mV = Low light OFF inverted Modems on request available
Bit rate	0 .. 5 MBit/s
LEDs	green: yellow: power input Vcc receive data
Housing	Metal case
IP rating	IP40
Mounting	optional with snap-in element for 35mm DIN rail (not retrofittable)
Dimensions	LxWxH ca. 72x55x20 mm
Weight	ca. 100 g
Power requirements	9V ... 30V DC at screw terminal or +5V DC +/- 5% at Sub-D pin 6 (do not use the screw terminal!) or 9V ... 30V DC at Sub-D pin 9 (do not use the screw terminal!)
Power consumption	170mA +/- 10% @ 5V DC
Operating temperature	-40°C .. +80°C
Storage temperature	-55°C ... + 125°C
Compliance	EN 55022 / EN 50081-1 EN 55024 / EN 50082-1 EN 50082-2
Country of origin	Germany
Ordering information item
This item / this item group has been replaced. The successor model is   0959021
Dimensional drawing
The product description has been prepared with great care. No liability is accepted for fallacies or errors. Subject to change.