technical data sheet

diese Seite auf deutsch

Technical data on item group 0961106
Industrial Gigabit Ethernet switch 8x RJ45 2x SFP, PoE

The manageable 10 port Gigabit Industrial Ethernet switch with 2 dual speed SFP ports may be used for constructing a star structure, a line structure or, by applicating the RSTP, MSTP or KAMR protocol, a ring structure. The 8 Gigabit Ethernet RJ-45 ports are for connecting of up to 8 end devices. Optional up to 4 end devices can be powered by PoE+ Power over Ethernet each with up to 30 Watts operating current according to IEEE 802.3at or IEEE 802.3af standard.
Technical data
Product	Industrial Gigabit Ethernet switch 8x RJ45 2x SFP, PoE PD or PSE (endspan) according to IEEE 802.3at/af standard
Port(s) electrical	8x 10/100/1000Mb/s RJ-45 Auto MDI/MDI-X
SFP Ports	2x 100BASE-FX 1000BASE-X dual speed SFP ports with DDM (Digital Diagnostic monitoring)
Flow control	IEEE802.3x (full-duplex), back pressure (half-duplex)
PoE ports	POE+ 35W max for Cat.5 up to 100m distance item 09614775: PSE at port 1-4 item 09614774: PD powered device at port 2
Framesize	max. 9600 Bytes
Management	HTTP/HTTPS/SSHv2/CLI telnet/CLI console SNMP v1/v2c/v3/RMON DHCP/DHCPv6 client, DHCP relay, DNS client. NTPv4 IPv6 support, system Syslog configuration down/upload, software upload HTTPS with SSL/TLS support NAS, 802.1X, MAC/WEB/CLI authentication IP MAC binding, TACACS+, IP source guard Console: RJ-45 connector, interface: RS-232
Management / Standards	802.1Q/MAC-based/Protocol-based/Private/IP subnet VLAN, port isolation Storm control for UC/MC/BC packets, static MAC configuration IGMP v2/v3 snooping, MLD v1/v2 snooping, DHCP snooping, port mirroring Spanning Tree MSTP, RSTP, STP QoS - 8 QoS classes, Tag-based & DSCP-based classification full wire speed forwarding port link aggregation function with LACP support Auto Multi-Ring(KAMR) technology: Fast failover response time.
LEDs	Device: Power, management status port: Speed, link/activity status SFP: Speed, link/activity status PoE: PoE status
Housing	Fanless metal case
Mounting	35mm DIN rail, optional wall mountable
Dimensions	WxDxH 42x106x140 mm
Fault Alarm Contact	Power failure, specific port link error interface: 2 terminal contacts (30VDC/1A max. or 120VAC/0,5A max.)
Power requirements	Terminal block: 2 pairs of +/- contacts 09614774: PD port 2 for power via PoE operating voltage: +7 .. +60VDC voltage for PoE PSE (item 09614775): +45 .. +57VDC
Power consumption	9W max.(Full Load without PoE) 150W max. (Full Load with 4 PoE max. output item 09614775)
Operating temperature	-40°C .. +70°C (60°C .. 70°C with 1m/s air flow)
relative humidity (non condensing)	5% .. 95% non condensing
Standard(s)	IEEE 802.3, 802.3ab, 802.3z, 802.3x, 802.3at, 802.1x, 802.1w, 802.1D, 802.1Q
Compliance	FCC Class A, VCCI Class A, CE mark Class A, IEC 60950-1 safety EN 61000-6-4 emission, EN 61000-3-2, EN 61000-3-3, EN 61000-6-2 Immunity for industrial environment IEC 60068-2-64 Vibration, IEC, 60068-2-27 Shock 50G test NEMA TS2 environment
Country of origin	Taiwan
Ordering information item 09614774 Industrial Gigabit Ethernet switch 8x RJ45 2x SFP PoE PD 09614775 Industrial Gigabit Ethernet switch 8x RJ45 2x SFP, PoE PSE Ordering information Accessories 12233405 Gigabit Ethernet SFP multimode 850nm 550m -40°C..+85°C DDM 12233402 Gigabit Ethernet SFP multimode 1310nm 2km -40°C..+85°C DDM 12233420 Gigabit Ethernet SFP singlemode 1310nm 20km -40°C..+85°C DDM 12233202 Fast Ethernet SFP multimode 1310nm 2km -40°C..+85°C 12233220 Fast Ethernet SFP singlemode 1310nm 20km -40°C..+85°C 122354053 GbE BiDi SFP multimode TX:1310nm RX:1550nm 500m -40°C..+85°C 122354055 GbE BiDi SFP multimode TX:1550nm RX:1310nm 500m -40°C..+85°C 122354203 GbE BiDi SFP singlemode TX/RX:1310/1550nm 20km -40°C..85°C DDM 122354205 GbE BiDi SFP singlemode TX/RX:1550/1310nm 20km -40°C..85°C DDM 122342023 Fast Ethernet BiDi SFP Multim. SC 1310/1550nm 2km -40°C..+85°C 122342025 Fast Ethernet BiDi SFP Multim. SC 1550/1310nm 2km -40°C..+85°C 122342203 Fast Ethernet BiDi SFP Singlem. SC 1310/1550nm 20km -40..+85°C 122342205 Fast Ethernet BiDi SFP Singlem. SC 1550/1310nm 20km -40..+85°C 11524024R Power supply 85-264V AC, OUT: 24V DC, 40W, -20..70°C DIN rail 115212401 DIN rail-power supply 120W 48V/2,5A (48V..55V DC) -20°+70°C 115212048 Industry power supply DIN rail 48V..55V DC 120W 2.5A -25~+70°C 115224048 Industry power supply DIN rail 48V..55V DC 240W 5A -25~+70°C 063600001 DIN rail installation panel for 19 inch distribution rack
The product description has been prepared with great care. No liability is accepted for fallacies or errors. Subject to change.