technical data sheet

diese Seite auf deutsch

Technical data on item group 095946
Industrial Fast Ethernet media converter POE

The media converter with Power over Ethernet PSE function provides operating power via the data cable for end devices, that are feeded by PoE according to IEEE 802.3at or IEEE 802.3af standard. Due to the small dimensions of 95x22.5x80mm (HxWxD), the converter can be well integrated into cabinets with limited space. In order to minimize the delay time, the device switches into converter mode on 100MBit/s and into cut-through mode on 10MBit/s at the RJ-45 copper side. The device supports LFP link fault pass-through for better error detection on faulty fiber link.
Technical data
Product	Fast Ethernet media converter, PoE endspan
Port(s) electrical	1x 10/100MBit 100Base-TX Fast Ethernet RJ-45
Port(s) optical	100Base-FX alternatively: multimode: Singlemode: HCS: POF: ST / BFOC, SC, E2000, SC BiDi (WDM) ST / BFOC, SC, E2000, SC BiDi (WDM) ST / BFOC, F-SMA, E2000 ST / BFOC, F-SMA, Opto-clamp
Optical parameters	Multimode: 50/125μm oder 62.5/125μm 1300nm / BiDi 1300nm + 1510nm Budget 12dB Singlemode 9/125μm 1300nm / BiDi 1300nm + 1510nm Budget 16dB HCS 200/230μm 850nm 12dB POF 980/1000μm 650nm 12dB
Transmission	Store and Forward
Bit rate	RJ-45 10/100MBit/s Full Duplex optisch 100MBit/s Full Duplex
PoE ports	1x IEEE 802.3at max. 40W
Housing	Stainless steel, powder coated
Mounting	35mm DIN rail
Dimensions	95x22.5x80mm (HxWxD)
Weight	150g
Power requirements	44V .. 57V DC
Power consumption	max. 40W (incl. PoE)
Operating temperature	-30°C ... +75°C
relative humidity (non condensing)	5% ... 95%
Compliance	EMC EN61000-6-2 / EN55022 Class B +A1 + A2
Country of origin	Germany
Ordering information item
This item / this item group has been replaced. The successor model is   0959422
Dimensional drawing
The product description has been prepared with great care. No liability is accepted for fallacies or errors. Subject to change.