technical data sheet | diese Seite auf deutsch |
Rugged manageable 5 port Industrial Fast Ethernet PoE switch in fanless metal case. For connection to the network the switch has an optical fiber port for multimode or singlemode fiber optic lines up to 30km. Four RJ-45 ports provide data transmission and operating current up to 30 W per end device. With the wide range input from 12V to 36V DC, the switch can be used in specific environments, where e.g. only 24V DC is available. The redundant DC power input ports, the isolated alarm contact, the mounting options for 35mm DIN rail or wall mounting and the extended temperature range allow the use in almost all areas of industrial data communication. | |||||||||||||||
Technical data | |||||||||||||||
Product | Manageable Industrial Fast Ethernet PoE Power over Ethernet switch with fiber optic uplink, input voltage 12V .. 36V DC, PoE IEEE 802. | ||||||||||||||
Casing | fanless IP30 metal case | ||||||||||||||
Dimensions | WxHxD 46x142x99mm | ||||||||||||||
Power requirements | Input voltage 12..36V DC at screw terminal removable terminal block | ||||||||||||||
Data ports | 4x RJ-45 1x LWL | ||||||||||||||
Port(s) optical | Fast Ethernet 100Base-FX multimode / singlemode connector SC or ST / BFOC | ||||||||||||||
Bit rate | 5x 10/100MBit/s Fast Ethernet full duplex RJ-45 ports | ||||||||||||||
Flow control | IEEE 802.3x Flow Control and Back Pressure | ||||||||||||||
PoE ports | 4x PoE+ (High PoE) max. 30W /Port IEEE 802.3at / IEEE 802.3af Pins 1+ 2+ 3- 6-, Mode A | ||||||||||||||
Management / Standards | Web / Telnet / RS-232 CLI / SNMP v1/v2c TFTP / SNTP / SMTP / RARP / Syslog STP, RSTP, MSTP, G.8032 ERPS (Recovery Time <50ms) IGMP v1/v2 max. 256 groups QoS (IEEE802.1p) and CoS/ToS IEEE802.1Q VLAN System Warning Setting for Automatic Warning through E-Mail USB 2.0 for Configuration Backup | ||||||||||||||
LEDs |
| ||||||||||||||
Mounting | 35mm DIN rail mountable wall-/Panelmontage both included in delivery | ||||||||||||||
Fault Alarm Contact | present | ||||||||||||||
Operating temperature |
| ||||||||||||||
Power consumption |
| ||||||||||||||
Stability tests | IEC60068-2-32 (free Fall) IEC60068-2-27 (Shock) IEC60068-2-6 (Vibration) | ||||||||||||||
Safety Standard(s) | FCC, CE, UL508 (Pending) | ||||||||||||||
| |||||||||||||||
Dimensional drawing | |||||||||||||||
The product description has been prepared with great care. No liability is accepted for fallacies or errors. Subject to change. |
UBF EDV Handel und Beratung Römerstr. 37 44579 Castrop-Rauxel Germany | Tel: +49 2305 9634 0 Fax: +49 2305 9634 17 | https://www.ubf.de eMal: vertrieb@ubf.de |