print   technical data sheet diese Seite auf deutsch diese Seite auf deutsch

Technical data on item group 114455
GbE PoE injector DC IN, OUT:IEEE 802.3at 35W EN-60945 EN-50155

GbE PoE injector DC IN, OUT:IEEE 802.3at 35W EN-60945 EN-50155
The Industrial high power Gigabit Ethernet PoE (Power over Ethernet) injector feeds devices according to IEEE 802.3at standard with 10/100/1000MBit/s 1000Base-T Gigabit Ethernet and 35W operating current rsp. alternatively devices according to IEEE 802.3af with 15.4W.

With CE approvals EN60945 and EN50155 the devices meet the special requirement for marine and railway

integrated mounting holes enable wall mounting without additional Panels or mounting on 35mm DIN rail in combination with snap-in elements. In metal case on request available.

Technical data
ProductIndustrial Gigabit Ethernet PoE injector 35W high power
also suitable for marine and railway
Port(s) electricalData input: 10/100/1000MBit/s 1000Base-T Gigabit Ethernet
PoE portsData output:
10/100/1000MBit/s 1000Base-T Gigabit Ethernet

current output:
+56V 35W
Load min./max.0.01A / 0.625A
Load reg.5 %
line reg.1 %
Ripple1 %
Noise1 %
Noise bandwidth from DC to 20MHz
Ripple and Noise measured by paralleling a 0.1uF metalize capacitor on the test point
Pin assignment PoE

pin
1
2
3
4
5
6
7
8
data
1000Base
A+
A-
B+
C+
C-
B-
D+
D-
data
100Base
RX+
RX-
TX+


TX-
power




V DC (+)
V DC (+)

V DC (-)
V DC (-)
LEDs
ready:red
IEEE 802.3at / 802.3af PoE current ok:green
CasingPlastic
MountingWall mountable
optional DIN rail mountable
DimensionsLxWxH: 125x75x38mm
Power requirements
item


11445512H
11445524H
11445548H
input voltage
redundant
of ~ up to
10V ~ 15V DC
18V ~ 36V DC
36V ~ 72V DC
input current


3.6A @ 12V DC
1.56A @ 24V DC
0.8A @ 48V DC
terminal pin assignment current input redundant
Efficiency
itemmin.%
at full Load
input voltage
11445512H
11445524H
11445548H
75%
80%
80%
10V DC ~ 15V DC
18V DC ~ 36V DC
36V DC ~ 72V DC
Operating temperature-40°C .. +75°C
CoolingFanless - Free air cooling
Storage temperature-40°C .. +80°C
relative humidity
(non condensing)
5% .. 90%
ComplianceUL 1950, CSA 22.2, EN60950
FCC Class B, EN55022 Class B
EN60945, EN50155
IEEE 802.3at, IEEE 802.3af
ProtectionInput protection: Fuse
dual input pin and reverse protection: No Work
Output Short GND Terminal will not damage the power supply and will Auto-Reset
Overcurrent
item 
11445512H
11445524H
11445548H
120% ~ 160% @ 12V DC input F.L.
120% ~ 160% @ 24V DC input F.L.
120% ~ 160% @ 48V DC input F.L.
Country of originTaiwan
Ordering information item
11445512HGigabit PoE injector IN:10-15V DC OUT:IEEE 802.3at 35W
11445512LGigabit PoE injector IN:10-15V DC OUT:IEEE 802.3at 35W DR
11445524HGigabit PoE injector IN:18-36V DC OUT:IEEE 802.3at 35W
11445524LGigabit PoE injector IN:18-36V DC OUT:IEEE 802.3at 35W DR
11445548HGigabit PoE injector IN:36-72V DC OUT:IEEE 802.3at 35W
11445548LGigabit PoE injector IN:36-72V DC OUT:IEEE 802.3at 35W DR
11445512MGigabit PoE injector IN:10-15V DC OUT:IEEE 802.3at 35W Metal
11445512NGigabit PoE injector IN:10-15V DC OUT:IEEE 802.3at 35W DR M
11445524MGigabit PoE injector IN:18-36V DC OUT:IEEE 802.3at 35W Metal
11445524NGigabit PoE injector IN:18-36V DC OUT:IEEE 802.3at 35W DR M
11445548MGigabit PoE injector IN:36-72V DC OUT:IEEE 802.3at 35W Metal
11445548NGigabit PoE injector IN:36-72V DC OUT:IEEE 802.3at 35W DR M
Ordering information Accessories
060812231Field installable RJ-45 plug for installation cable
063600001DIN rail installation panel for 19 inch distribution rack
Dimensional drawing
dimensional drawing 114455 GbE PoE injector DC IN, OUT:IEEE 802.3at 35W EN-60945 EN-50155
The product description has been prepared with great care. No liability is accepted for fallacies or errors. Subject to change.

UBF EDV Handel und Beratung

Am Industriepark 3
84453 Mühldorf am Inn
Germany
Tel: +49 8631 91011 0
Fax: +49 8631 91011 60
http://www.ubf.de
eMal: vertrieb@ubf.de