print   technical data sheet diese Seite auf deutsch diese Seite auf deutsch

Technical data on item group 114414D
Power over Ethernet PoE injector IN:10-36VDC OUT:IEEE 802.3af

Power over Ethernet PoE injector IN:10-36VDC OUT:IEEE 802.3af
The Industrial Fast Ethernet Power over Ethernet injector feeds devices according to IEEE 802.3af standard with 10Base-T Ethernet or 100Base-TX Fast Ethernet and 16.8W operating current

Integrated mounting holes enable wall mounting without additional Panels or mounting on 35mm DIN rail in combination with snap-in elements.

Technical data
ProductIndustrial Fast Ethernet PoE injector according to IEEE 802.3af standard
Port(s) electricalData input: 100Base-TX Fast Ethernet
PoE portsData output:
100Base-TX Fast Ethernet

current output:
Load min. / max.  
Load reg.
Line reg.
Ripple
Noise
+48V 16.8W
0.01 A / 0.35 A
5 %
1 %
1 %
1 %
Noise bandwidth from DC to 20MHz
Ripple and Noise measured by
paralleling a 0.1uF metalize capacitor on the test point
Pin assignment PoE
pin  
1
2
3
4
5
6
7
8
data  
RX+
RX-
TX+


TX-
power



V DC (+)
V DC (+)

V DC (-)
V DC (-)
LEDs
ready:red
IEEE 802.3af PoE current ok:green
Housing
itemcasingdimensions
LxWxH
fastening
114414ITD
114414006
114414001
114414007
plastic
plastic
metal
metal
86x76x36mm
86x76x36mm
82x73x35mm
82x73x35mm
wall
DIN rail
wall
DIN rail
Mounting
itemfastener
114414ITDwall
114414006DIN rail
114414001wall
114414007DIN rail
Power requirements
10V DC .. 36V DC redundant
1.85A @ 12V DC
0.90A @ 24V DC
terminal pin assignment current input redundant
Efficiency75% min. at Full Load, @ 12V DC / 24V DC
Operating temperature
itemoperating temperature
114414ITD
114414006
114414001
114404007
-40°C .. +75°C
-40°C .. +75°C
-40°C .. +85°C
-40°C .. +85°C
CoolingFanless - Free air cooling
relative humidity
(non condensing)
5% .. 90%
Storage temperature-40°C .. +85°C
ComplianceUL 1950 (no certification), CSA 22.2, EN60950
FCC Class B, EN55022 Class B
ProtectionShort Circuit Protection
Output Short GND Terminal will not damage the Power Supply and will Auto-Reset.
Input Fuse Protection.
Dual Input Pin & Reverse Protection -> NO Work
Overcurrent120% ~ 160% 12V DC Input F.L.
Country of originTaiwan
Ordering information item
114414ITDPoE injector 10..36V DC IN -40..+75°C
114414006PoE injector 10..36V DC IN -40..+75°C DIN-rail
114414001PoE injector 10..36V DC IN -40..+85°C metal case
114414007PoE injector 10..36V DC IN -40..+85°C metal case DIN rail
Ordering information Accessories
114461405PoE splitter 5V DC 12W 2.4A -25..+60°C
114461409PoE splitter 9V DC 12W 1.33A -25..+60°C
114461412PoE splitter 12V DC 12W 1.0A -25..+60°C
114461424PoE splitter 24V DC 12W 0.5A -25..+60°C
063600001DIN rail installation panel for 19 inch distribution rack
Dimensional drawing

metal case
dimensional drawing 114414D PoE injector IN:10-36VDC OUT:IEEE 802.3af metal casemetal case

plastic case
MaßzeichnungMaßzeichnung 114414D PoE injector IN:10-36V DC OUT:IEEE 802.3afplastic case
The product description has been prepared with great care. No liability is accepted for fallacies or errors. Subject to change.

UBF EDV Handel und Beratung

Römerstr. 37
44579 Castrop-Rauxel
Germany
Tel: +49 2305 9634 0
Fax: +49 2305 9634 17
https://www.ubf.de
eMal: vertrieb@ubf.de