technisches Datenblatt | this page in English |
Robuster, voll managebarer Industrial Fast / Gigabit Ethernet Switch mit 8x PoE Power over Ethernet Ports in lüfterlosem Metallgehäuse. Für Uplink und Downlink stehen zwei Fast / Gigabit Ethernet SFP Steckplätze zur Verfügung. Beide können wahlweise mit 100Base und/oder 1000Base SFPs bestückt werden. Dies ermöglicht die optimale Anpassung an bestehende Netzwerk Infrastrukturen. Redundanzmechanismen wie X-Ring Protokoll mit coupling Ring Funktion, Dual Homing, STP Spanning Tree Protocol und RSTP Rapid Spanning Tree Protocol ermöglichen den Aufbau von sicheren Netzwerkstrukturen wobei die Wiederherstellungszeiten mit X-Ring minimiert werden können. | |||||||
Technische Daten | |||||||
Produkt | Industrial Fast Ethernet Switch | ||||||
Port(s) elektrisch | 2x 1000Base-T 10/100/1000MBit/s RJ-45 Combo Ports 8x 100Base-TX 10/100MBit/s RJ-45 Interface auto-negotiation und auto MDI / MDI-X 1x RS-232 RJ-45 Console Interface Management Port Anschlusskabel RJ-45 / D-Sub9 im Lieferumfang enthalten. | ||||||
Port(s) optisch | 2x 100/1000MBit/s Dual Speed SFP Steckplatz | ||||||
LEDs | System:
8x 100BaseTX:
2x SFP Combo:
| ||||||
Flusskontrolle | Back pressure for half duplex IEEE 802.3x Pause Frame for full duplex | ||||||
Switch Architecture | Store-and-Forward | ||||||
Switch Fabric | 5.6Gbps non-blocking | ||||||
Switch Throughput | 8.3Mpps @ 64 Bytes | ||||||
Address Table | 8K entries | ||||||
Maximum Frame Size | 1522 Bytes | ||||||
Stromversorgung | 48V DC redundant power with polarity reverse protect function removable terminal block | ||||||
Gehäuse | Metallgehäuse IP30 | ||||||
Abmessungen | BxTxH 72x105x152mm | ||||||
Montage | 35mm DIN Hutschiene und Wandbefestigung | ||||||
ESD Schutz | 6KV DC | ||||||
EFT Schutz | 3KV DC | ||||||
Betriebstemperatur | -40°C .. +75°C | ||||||
relative Luftfeuchtigkeit (nicht kondensierend) | 5% .. 95% | ||||||
Relais | Relais Ausgang für power fail 1A @ 24V DC | ||||||
Datenrate | 8x RJ-45: 10/100MBit/s Full Duplex 2x RJ-45: 10/100/1000MBit/s Full Duplex SFP: 100/1000MBit/s Full Duplex | ||||||
Stromverbrauch | max. 128W (mit Poe Full Load) | ||||||
PoE Standard | IEEE 802.3af PSE | ||||||
PoE Ports | 8x 10/100MBit/s | ||||||
PoE Output | 48V DC, max. 15.4W | ||||||
PoE Pin Assignment | 1/2(+), 3/6(-) | ||||||
Konform mit | IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T IEEE 802.3z Gigabit Ethernet 1000Base-SX / LX IEEE 802.3x Full-Duplex Flow Control IEEE 802.1d STP Spanning Tree Protokoll IEEE 802.w RSTP Rapid Spanning Tree Protokoll IEEE 802.1p Class of Service IEEE 802.1Q VLAN Tagging IEEE 802.1x Port Authentication Network Control IEEE 802.3af Power over Ethernet | ||||||
EMV elektromagnetische Verträglichkeit | FCC Class A CE EN61000-4-2 (ESD) CE EN61000-4-3 (RS) CE EN61000-4-4 (EFT) CE EN61000-4-5 (Surge) CE EN61000-4-6 (CS) CE EN61000-4-8 CE EN61000-4-11 CE EN61000-4-12 CE EN61000-6-2 CE EN61000-6-4 | ||||||
Mechanische Tests | IEC60068-2-32 (Free fall) IEC60068-2-27 (Shock) IEC60068-2-6 (Vibration) | ||||||
Management | WEB-based Telnet Console CLI SNMP v1, v2c und v3 | ||||||
Port Configutation | Port disable / enable Auto negotiation 10/100MBit/s, FDX / HDX Flow Control disable / enable Bandwidth control on each port | ||||||
Port Status | Speed Duplex mode Link status Flow control status Auto negotiation status | ||||||
VLAN | Port based VLAN - bis zu 9 VLAN Gruppen IEEE 802.1q Tagged VLAN, bis zu 256 VLAN Gruppen | ||||||
Spanning Tree | IEEE 802.1d Spanning Tree IEEE 802.1w Rapid Spanning Tree | ||||||
Link Aggregation | Supports 4 groups of 4-Port trunk support | ||||||
QoS | Traffic classification based on: Port Nr. 802.1Q Tag 802.1p Priorität IP DSCP/TOS field in IP packet | ||||||
IGMP Snooping | v1 und v2 256 Multicast Gruppen und IGMP query | ||||||
Bandwidth Control | Per port bandwidth control Eingang: 500Kb..80Mbps Ausgang: 64Kb..80Mbps | ||||||
Port Mirroring | RX / TX / beide | ||||||
Security | 100 MAC Adresseinträge statisch und 100 für MAC Filter 10 IP Adressen für Management Zugriff | ||||||
Relay Alarm | Relais Ausgang für power fail 1A @ 24V DC | ||||||
DHCP Protokoll | DHCP Client DHCP Server Port and IP Binding | ||||||
SNMP MIBs | RFC-1157 SNMP MIB RFC-1213 MIB-II RFD-1215 Trap RFC-2863 Interface MIB RFC-1493 Bridge MIB RFC-2674 Extended Bridge MIB (Q-Bridge) RFC-1643, RFC-1157 RSTP MIB Private MIB | ||||||
Ursprungsland | Taiwan | ||||||
Bestellinformation Artikel | 10141022T | ||||||
Die Produktbeschreibung wurde mit größter Sorgfalt erstellt. Für Irrtümer oder Fehler wird keine Haftung übernommen. Änderungen vorbehalten. |
UBF EDV Handel und Beratung Am Industriepark 3 84453 Mühldorf am Inn Germany | Tel: +49 (0)8631 91011 0 Fax: +49 (0)8631 91011 60 | http://www.ubf.de eMal: vertrieb@ubf.de |